Skip to content
WestmountLocksmith Co.Open 24/7 (226) 806-0434
Key-cutting machine with red handles on a worn wooden bench beside a tray of loose keys, key fobs and a screwdriver.
A locksmith you would recommend to a neighbour.

WestmountLocksmith Co.

Locks Keys Safes

Locksmith in Waterloo, OntarioPatient with
old hardware.

Some doors have been opening for a century, and the hardware on them deserves better than a hacksaw. We take the time to free seized mechanisms, re-pin original cylinders and fabricate keys for locks whose blanks went out of production long ago.

Request a visit

Same fees day or night · Waterloo

Locksmith services

Pick the closest, or call (226) 806-0434

WESTMOUNT LOCKSMITH CO. · OPEN 24/7 · WATERLOO · 33YEARS IN BUSINESS

Our way of working

Before anything comes out of the van, we ask what you are trying to achieve. A family that has just moved in wants every stranger's key to stop working. A landlord wants the next turnover to be easier. A shop owner wants to know who opened the back door at nine. The right hardware follows from that answer, not the other way around.

Nearby Lakeshore Village, Westmount, Beechwood, Maple Hills and Rummelhardt

Shop rules

A locksmith you would recommend to a neighbour.

  1. A look before a verdict. We inspect the door, frame and lock before suggesting anything. Diagnosing from the driveway is how people end up with parts they did not need.
  2. Two or three real choices. Where there are sensible alternatives we explain them side by side, including the option of doing less than you expected.
  3. The job finished properly. Tested, aligned, cleaned up and demonstrated. We do not consider a lock done until you have turned the key yourself.
  4. Open 24/7, same fees any hour. Ask about a spare key before you need one.

33 years in business · Talk to us about access for your staff: (226) 806-0434

Home lockout service

Ways we can help you

Think of this page as a menu rather than a manual. You do not need to know the name of the part or the type of cylinder in your door. Pick the section that sounds closest, read what the visit looks like, and we will fill in the details together.

Technician examining detached commercial lock hardware on a table outside a shop entrance. — Business Lockout Service, Waterloo

Lockout Services

Locks jam, keys break in the cold, doors get forced.

Close view of a satin-nickel deadbolt thumbturn and edge faceplate on a painted timber door. — Deadbolt Installation, Waterloo

Change or Rekey Locks

Most home locks were whatever the builder had on the truck, and the strike is screwed into softwood trim…

Small things.
Big difference.

The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.

Job sheet1 of 3

Lost Keys — Same-Visit Rekey

Two people exchanging a key at an open front door, with a disassembled lock cylinder and small parts arranged on a cloth nearby. — Lost Keys — Same-Visit Rekey, Waterloo
The call
The spare under the planter by the side door is gone. Everyone in the family swears they did not take it, the planter has clearly been shifted, and you have no idea how long ago that happened.
First step
Confirming who is asking for the change

ServiceLost Keys — Same-Visit Rekey

Job sheet2 of 3

Deadbolt Installation

Person in a cap and glasses holding an old mortise lock plate against a bare slot in a wooden door edge.
The call
You moved in three weeks ago. The previous owner left a handful of keys, none labelled, and the bolt on the side door rattles in its housing.
First step
Where the bolt should sit on the door

ServiceDeadbolt Installation

Job sheet3 of 3

Business Lockout Service

Technician in a cap and safety glasses holding a push bar end cap against a metal door with a red drill.
The call
You signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on both doors and no keys came with them. Your fixtures arrive tomorrow and the doors will not open.
First step
Weather, salt and wear on an exposed lock

ServiceBusiness Lockout Service

Fig.1
Locksmith

High Security Locks

Drawn forWaterloo
ScaleNot to scale

Upgrading to high security often does not mean new locks. Many quality cylinders retrofit into the deadbolt or lever you already have, so the door keeps its look and gains a mechanism that resists picking, bumping and drilling.

  1. Layer 1The key

    High Security Locks

    The pharmacy stockroom, the server closet or the cash office is protected by the same ordinary cylinder as the staff washroom. One lost key on a lanyard would open all of them.

  2. Layer 2The cylinder

    Lock Replacement & Upgrade

    Three teenagers, a dog walker, a cleaner and one house key that keeps going missing. You are tired of cutting copies and would rather give each person a code you can switch off, with a proper deadbolt behind it.

  3. Layer 3The bolt and strike

    Deadbolt Installation

    You bought a keypad deadbolt online and pulled the old one off, only to find the hole in the door is a different size and the bolt latch sits at a backset the new kit does not list. The door is now open and the box is on the counter.

  4. Layer 4The door and frame

    Break-In Damage Lock Repair

    They did not get in. The attempt left a screwdriver gouge in the door edge, a strike plate bent outward and a deadbolt that now needs a shove to throw.

High Security Locks. The pharmacy stockroom, the server closet or the cash office is protected by the same ordinary cylinder as the staff washroom.

Request a visit
Two rows of lock cylinders on a metal surface with keys and colored key tags in front. — Master Key System Design, Waterloo

Safes

Safe Opening & Combination Change

Two different problems can look identical from outside a locked safe: a combination that genuinely no longer opens it, and a mechanism that is jammed, corroded or blocked while the correct numbers still work perfectly. Sorting out which…

Person holding a clipboard beside a closed black safe with a circular keypad in a carpeted room. — Safe Installation & Servicing, Waterloo

Which fix fits?

Tap a situation. The answer opens here.

If You moved in and have no idea how many house keys exist.

Then A patented cylinder in each exterior door, on one key.

Old keys stop working and new ones cannot be copied without you.

If A neighbour's door was kicked in and yours has the same thin strike.

Then A reinforced strike with long screws into the framing.

The bolt then ties into the studs, which is where kicked doors fail.

If The stockroom has the same cylinder as the staff washroom.

Then A rated cylinder and a controlled key for that door.

One numbered key, issued against a signature, in a cylinder that resists picks and drills.

Five scenes · open 24/7

How a visit goes

Before anything comes out of the van, we ask what you are trying to achieve. A family that has just moved in wants every stranger's key to stop working.

Illustration: a phone ringing on a dark shop counter, a photo of the front door arriving beside it
  1. Illustration: a phone ringing on a dark shop counter, a photo of the front door arriving beside it

    Step 1 of 5

    Call and describe the door

    Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

  2. Illustration: a white work van with its headlights on, driving a lit street at night

    Step 2 of 5

    On our way

    We ask for something that ties you to the premises: a lease, business card, or a call to the owner. Opening a shop for the wrong person is not a risk we take.

  3. Illustration: the van in the driveway, the porch light on, a photo ID card and a utility bill beside the front door

    Step 3 of 5

    A look before a verdict

    We inspect the door, frame and lock before suggesting anything. Diagnosing from the driveway is how people end up with parts they did not need.

  4. Illustration: three cards in front of the door, one option chosen and two faded

    Step 4 of 5

    Two or three real choices

    Where there are sensible alternatives we explain them side by side, including the option of doing less than you expected.

  5. Illustration: a new key turned in the deadbolt, a check mark beside it and the porch light glowing

    Step 5 of 5

    The job finished properly

    Tested, aligned, cleaned up and demonstrated. We do not consider a lock done until you have turned the key yourself.

Waterlooinformation

WaterlooOntario

Town
Waterloo
In business
33 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 33 in 100 homes · newer homes
  • About 33% of homes in Waterloo were built in 1980 or earlier, according to the 2021 Census.During construction many people hold a key: framers, finishers, painters, the sales office. Where homes are new, rekeying the exterior doors to a fresh key is the tidy way to close that chapter, and it takes a single visit.
  • Single-detached houses make up about 49% of homes in Waterloo (2021 Census).Neighbourhoods of houses beside townhouses and low-rise buildings have a range of door constructions: solid wood, steel, fibreglass and metal-clad. A locksmith who works in such an area is used to fitting hardware to all of them without new holes.

Source: Statistics Canada, Census Profile

Open Waterloo in Google Maps

Good questions about locks

Is a restricted keyway worth it for a business?

A restricted keyway uses blanks that only the locksmith or authorized source can obtain, released against whatever that key-control program requires, a signed letter, card, signature record or factory authorization naming who may order keys. Hardware stores and kiosks have no blanks, so copies are far harder to get without your say-so. It costs more per key than a standard keyway and is most valuable where keys pass through many hands, such as retail with part-time staff, shared premises or anywhere the count of copies has drifted before.

Does stamping keys 'do not duplicate' stop people copying them?

Not reliably. The stamp is a request, and any key on a standard blank can be copied by anyone with the blank and a machine. What does work is controlling the blank itself through a restricted keyway, or controlling access to the lock through interchangeable cores and a tight register. Stamping still has a place: a serial code on each key, instead of the business name, lets you track it without telling a finder where it fits.

How long should we set aside for a commercial rekey?

It depends on the count and the mix. A shop with a front door, a back door and a stockroom is a short visit; an office suite with a dozen lever sets, a master key plan and a mailbox takes a good part of a day. Interchangeable cores are the shortest of all, since they are swapped rather than repinned on site. The locksmith gives a time estimate at the assessment, once every cylinder has been counted.

Can a high security cylinder be rekeyed later?

Yes. Like any pin tumbler it can be repinned to a new combination by a locksmith who holds the system, so a departed employee's key can be retired without replacing hardware. Some lines use interchangeable cores that swap in moments with a control key, which suits businesses with frequent turnover. Rekeying stays within your registered keyway, so the key control you paid for continues after the change.

On-site assessment

Request a visit.

Ask about a spare key before you need one.

(226) 806-0434, open 24/7.