Skip to content
WestmountLocksmith Co.Open 24/7 (226) 806-0434
Technician in a cap working a screwdriver at a steel lock plate on a navy door, with an open tool bag behind.

Locksmith · Waterloo

Our advice corner

We get the same questions from new homeowners, long-time tenants and business managers alike, so we have answered them properly here. How rekeying works, what makes a lock secure, what to do about a lost car key and how to plan keys for a building.

Good questions about locks

Person holding a key beside a brass-colored deadbolt on an open painted door while another person watches from inside. — Home Lockout Service, Waterloo

Lockout Services

Should I try to get in myself before calling?

By all means check the easy things: another door, a family member with a spare, a neighbour holding a key. Beyond that, it pays to wait. Credit cards bend latches, screwdrivers scar cylinders, and a forced window costs far more than a lockout visit and leaves the house less secure. A locksmith arrives with tools shaped for the exact hardware on your door, and an undisturbed lock is the easiest kind to open cleanly. Home Lockout Service

Will opening our glass storefront door damage it?

In almost every case the door, the glass and the lock are untouched. The mortise cylinder in the narrow stile is picked or decoded so the cam turns exactly as it would for your key, and the hookbolt or latch withdraws. Drilling comes up when a cylinder has seized, is packed with a broken key, or its security features and condition rule out a clean non-destructive opening, and if it comes to that you hear about it first and a new cylinder goes in during the same visit. Business Lockout Service

Will the lock work again once the piece is out?

In most cases yes, and it is tested in front of you with a key that fits. The inspection after extraction is where the honest answer lives: if the pins, springs and cap are sound and the keyway is clean, the cylinder goes back into service with a fresh key. If wear or damage caused the break, that is explained and a rekey or new cylinder is offered as a separate choice. Broken Key Extraction

My condo entry door is a fire-rated door. Does that change the repair?

Yes, in a good way. A suite door that opens onto a corridor is meant to close and latch on its own every time, so the repair uses hardware suited to a labelled fire door, keeps the self-closing device adjusted and operating, and adds no holes or plates the label does not allow. The building's manager is normally involved, and the locksmith works with the door's rating rather than around it. Break-In Damage Lock Repair

Two detached brass lock cylinders and four house keys on a wooden counter. — Lock Rekeying, Waterloo

Change or Rekey Locks

Will my door hardware look any different afterwards?

No. The work happens inside the cylinder, so the bolt, handle, finish and strike plate stay exactly as they are, and nothing new is cut into the door. The only visible change is the key in your hand. If a cylinder does have to be replaced, because its keyway is incompatible with the others or it has worn out, the locksmith picks one in a matching finish so the door keeps a consistent look. Lock Rekeying

Someone forced my door. Can the new deadbolt go into the same frame?

In most cases, yes. The locksmith examines the jamb for splits and stripped screw holes, glues and pins any cracked section, and fits a full-length jamb reinforcer under the strike so the new long screws bite into sound wood and the stud behind. A new pocket is bored to the correct depth. Where the jamb is beyond repair, replacing that section of frame is discussed before any lock goes on. Deadbolt Installation

How long does a lock replacement take?

A straightforward like-for-like deadbolt or knob set on a standard door is often a matter of an hour or less including testing. Add time for a reinforced strike, for keying several locks alike and cutting keys, for a smart lock's setup and pairing, and for repairing a split jamb or adapting an older door. When several entrances are done together, the locksmith gives a realistic window before starting so you can plan the day. Lock Replacement & Upgrade

How long does servicing a mortise lock take?

A single entry lock that needs cleaning, springs and a strike adjustment is generally done in one visit of an hour or two. Filing a bit key adds bench time, and a set of interior latches is longer simply because there are more of them. A case that needs a part fabricated, or a replacement case that has to be ordered to size, may mean a second visit; the locksmith says so at the assessment. Vintage Mortise Lock Service

Two adults discussing a closed keypad safe in a home study. — Safe Opening & Combination Change, Waterloo

High Security Locks

Will opening my safe damage it?

In most cases the lock and case are left intact, since manipulation, decoding and manufacturer reset paths all work the mechanism the way the original combination would. Drilling is kept for cases where the gentler routes are unavailable or exhausted, aimed at one small point the manufacturer marks as repairable, and patched before the visit ends; a skilled technician aims to leave the rest of the body, hinges and finish unaffected, though the outcome and any effect on the safe's rated protection level depends on its construction. Safe Opening & Combination Change

How often does the battery need replacing on an electronic lock?

Most electronic locks give a low-battery warning, usually a beep or flashing light, well before they actually stop working, and replacing the battery within that same week is the safer habit rather than waiting. Depending on how often the safe is opened, a battery commonly lasts somewhere between one and several years, and keeping a spare of the correct type near the safe avoids a search once the warning starts. Safe Installation & Servicing

Can a high security cylinder be rekeyed later?

Yes. Like any pin tumbler it can be repinned to a new combination by a locksmith who holds the system, so a departed employee's key can be retired without replacing hardware. Some lines use interchangeable cores that swap in moments with a control key, which suits businesses with frequent turnover. Rekeying stays within your registered keyway, so the key control you paid for continues after the change. High Security Locks

Person holding a door-handle and latch assembly at a worktable outside a glass entrance, with additional handles and tools laid out. — Commercial Rekeying, Waterloo

Commercial Locks

What information should I have ready before the locksmith arrives?

A list of the doors and other locks you want included, a copy of the lease or the property manager's contact, every existing key you can find, and a rough idea of who needs to open what. Note which doors, if any, are interchangeable cores and where the control key is. Knowing your quiet hours and who opens up in the morning helps the locksmith plan the order of work and the key handover. Commercial Rekeying

How is accountability maintained when several people hold different levels of keys?

Through the chart and issuance log rather than memory. Each level is tied to named roles or people, each key is marked to reflect its level rather than the door it opens, and any change of hands is recorded with a signed receipt. That record names every authorized holder for a door, though it can only account for a key that was never copied, loaned or picked up by someone outside that list. Master Key System Design

Do we still need physical keys after this is installed?

On hardware that supports it, yes: a conventional cylinder sits alongside the electronic reader, cut to work like any other key on the property, though some access-controlled locks are built without one. Where it is fitted, it is meant as a fallback rather than the everyday way in: if a battery dies, a controller faults, or the power stays out longer than the backup lasts, the door still opens by key while the issue is sorted out. Access Control Installation

Can I add a request-to-exit switch for my access-control system?

Yes. A request-to-exit switch is wired to signal the access-control panel that the pushpad or crossbar was actuated. Telling that apart from a forced or propped door usually means pairing it with a door-position contact and the panel's own logic, since the switch on its own only reports that the hardware was used. It sits alongside the mechanical device without changing how the crossbar or touchpad works, so the door still releases under a push even if the access-control system loses power. Panic & Exit Hardware

Two adults discussing a key fob beside a parked car. — Car Lockout Service, Waterloo

Car Keys

The whole car is dead, not just the fob. Can you still open it?

Yes. When the interior lights, horn and remote are all silent, the car's own twelve-volt battery has run flat, and the fob has nothing to talk to. The door is opened through the mechanical cylinder or with a wedge and reach tool; loose or corroded connections and other faults can look the same as a dead battery, so it is checked and confirmed safe before a jump pack brings the car back to life. If the battery will not hold a charge, you will know before the locksmith leaves. Car Lockout Service

The car is leased or belongs to my employer. Can you still make me a key?

Yes, with the right paperwork. For a leased car, the lease agreement in your name together with your identification and the permit covers it. For a company vehicle, the locksmith needs authorization from the business: a work order, purchase order or letter naming the VIN and the person collecting the key. Mention the arrangement when you call so the correct document is ready and the record can be completed properly. Car Key Replacement

Should I get the locks rekeyed when I get a spare, or is that a different service?

They are related but not identical, since a car's door and ignition locks are a separate mechanical layer from the immobilizer even though both systems usually get touched in the same visit. Making a spare and removing a genuinely unaccounted-for key's electronic access are handled together, and if that lost key's blade could still turn a matching door cylinder by hand, the locksmith rekeys that cylinder as part of the same appointment. Spare Car Key Duplication

Does key fob programming include cutting a mechanical key?

It can. Most proximity fobs hide a small mechanical blade inside the case for the day the battery dies or the electronics fail, and that blade is cut separately from the programming procedure, either to the vehicle's original code or matched to an existing working key. If your replacement fob arrived without a cut blade, mention it so the visit includes cutting one. Key Fob Programming

On-site assessment

Request a visit.

Ask about a spare key before you need one.

(226) 806-0434, open 24/7.