Skip to content
WestmountLocksmith Co.Open 24/7 (226) 806-0434

Westmount Locksmith Co.Bulletin 3 of 3Waterloo, Ontario

Ignition Lock Repair: getting ready

The car arrived with one worn-looking key and a story about a lost spare.

Key-cutting machine with red handles on a worn wooden bench beside a tray of loose keys, key fobs and a screwdriver.
A locksmith you would recommend to a neighbour.

The car arrived with one worn-looking key and a story about a lost spare. It turns the ignition, eventually, after some patience and a particular angle nobody in the household can quite describe or repeat on the first try.

Worth answering before the call

Do the doors or trunk use the same key as the ignition? Does the key insert, turn partway, or not turn at all? What is the vehicle's year, make and model?

What is actually different between ignition lock repair and dealer key programming?

The lock cylinder is mechanical: a key physically turns it through accessory, on and start. The immobilizer and transponder system is electronic: it recognises a chip inside the key before allowing the engine to run. A locksmith services or replaces the physical cylinder; programming a chip to the vehicle's electronic system is separate work that a suitably equipped automotive locksmith, a dealer, or an automotive electrical specialist can handle.

Can ignition lock repair get a car running again if it won't start at all?

Sometimes, and sometimes the ignition is only part of the picture. If the barrel is not turning the switch through its positions, freeing or replacing it can resolve the whole problem. If the barrel turns properly and the vehicle still stays silent, the remaining cause sits elsewhere in the electrical or fuel system, and that half of the question is named clearly rather than guessed at.

On-site assessment

Request a visit.

Ask about a spare key before you need one.

(226) 806-0434, open 24/7.