Skip to content
WestmountLocksmith Co.Open 24/7 (226) 806-0434

Westmount Locksmith Co.Bulletin 1 of 3Waterloo, Ontario

Car Key Replacement: reading the quote

Adding a spare uses an existing working key as the reference: the new blade is cut and checked against it, and the immobilizer is asked to accept one more key alongside the old.

Key-cutting machine with red handles on a worn wooden bench beside a tray of loose keys, key fobs and a screwdriver.
A locksmith you would recommend to a neighbour.

Adding a spare uses an existing working key as the reference: the new blade is cut and checked against it, and the immobilizer is asked to accept one more key alongside the old. Replacing all keys starts with nothing: the lock is decoded for a blade, and the immobilizer is reset to forget every previous key before new ones are stored. The second job is longer and sometimes needs manufacturer data, one more reason to keep a spare.

Shell only, or a complete key

If your key's electronics are healthy, a new case and blade around the old board is a smaller job than a complete key with programming. The inspection decides which, before anything is quoted.

Year, make and model

The vehicle decides the blank, the chip and the programming route. A twenty-year-old sedan with a plain transponder key and a recent proximity-start model are different jobs, and the quote follows the VIN rather than a flat figure.

Where the vehicle is

Travel is part of every mobile call. A car on a driveway across town and one in a lot at the end of a rural road involve different trips, and the quote reflects the distance.

On-site assessment

Request a visit.

Ask about a spare key before you need one.

(226) 806-0434, open 24/7.