Skip to content
WestmountLocksmith Co.Open 24/7 (226) 806-0434
Technician examining detached commercial lock hardware on a table outside a shop entrance. — Business Lockout Service, Lakeshore Village

Lockouts · Lakeshore Village

Business Lockout Service

You signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on both doors and no keys came with them. Your fixtures arrive tomorrow and the doors will not open.

In plain words

The end of a business lockout is a paper trail as well as an open door. You receive a plain written account of which door was opened, how, what condition the hardware was in, what was replaced, how many keys were cut and who took them. Landlords, insurers, franchisors and head offices routinely ask for exactly this, and it saves an awkward conversation later. Where a door sits on an exit route, the record also notes that it still releases from inside with a single motion and without a key, so everyone can leave the building without hunting for anything.

Sound familiar?Lakeshore Village

The call
The manager who holds the only set of office keys is on a plane. The team is gathered in the corridor outside the suite, the landlord's office does not open for another hour, and the client meeting is at nine-thirty.

NextHow the visit goes

Business Lockout Service · Lakeshore Village

How the visit goes

Key-cutting machine with red handles on a worn wooden bench beside a tray of loose keys, key fobs and a screwdriver. — Lakeshore Village
  1. Scene 1

    Weather, salt and wear on an exposed lock

    A storefront cylinder lives a hard life: sidewalk salt, slush, rain and a thousand key turns a month. In winter the locksmith checks for frost on the cylinder face, tests how far the key seats, and judges whether cold grease or real ice is holding the plug. In any season the keyway is inspected for grit and a worn key is compared with a fresh one, since a copy of a copy stops lifting the pins cleanly long before it breaks. This tells the locksmith whether a patient thaw, a cleaning and dry lubricant, or a new cylinder is the right response, and what to leave behind so the same morning is not repeated.

  2. Scene 2

    Doors with a push bar inside

    A rear door fitted with an exit device is opened from outside through its trim: a keyed lever, a pull with a cylinder, or a bare cylinder in a nightlatch function. Depending on that trim, picking or decoding the cylinder either retracts the latch directly, the way a nightlatch trim does, or unlocks a lever, knob or thumbpiece that then has to be turned to let the latch go. The device itself, including any vertical rods and the dogging mechanism, is left exactly as installed, because it is the way out in an emergency. Afterwards the bar is pressed from inside to confirm the latch releases with one push, and the outside trim is checked for a loose cylinder.

  3. Scene 3

    Exit doors that still let everyone out

    Whatever was replaced, a door on the way out of the building still opens from inside with a single motion and no key while people are in it. That standard is why a storefront gets a thumb-turn or paddle inside, a rear door keeps its push bar, and a double-cylinder deadbolt does not go on an exit route. The locksmith checks each door for this before leaving and points out any older hardware, such as a chain or a keyed-inside bolt on a back door, that the business may want to bring into line.

In the van

  • Control keys and core-removal tools
  • Strikes, pivot shims and closer adjustment tools
  • Cylinder decoder and plug spinner
  • Storefront deadlatch and hookbolt bypass tools
  • Lock de-icer and dry PTFE lubricant

What shapes the quoteWestmount Locksmith Co.

Storefront, lever, mortise or exit device
An aluminium storefront cylinder, a cylindrical lever lockset, a full mortise lock and the trim of an exit device each take different tools and time to open, and the hardware on your door sets the starting point.
Rekeying or swapping cores afterwards
Making a lost or unreturned key useless is separate work, priced per cylinder or per core, and the count of doors sharing that key decides how much of it there is.
Distance and access to the door
Travel is part of every call-out, and so is reaching the door: a plaza unit at street level, a suite behind a locked lobby, or a loading dock at the back of an industrial park each take a different amount of the locksmith's time.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(226) 806-0434

Good questions about locks

Will opening our glass storefront door damage it?

In almost every case the door, the glass and the lock are untouched. The mortise cylinder in the narrow stile is picked or decoded so the cam turns exactly as it would for your key, and the hookbolt or latch withdraws. Drilling comes up when a cylinder has seized, is packed with a broken key, or its security features and condition rule out a clean non-destructive opening, and if it comes to that you hear about it first and a new cylinder goes in during the same visit.

I am an employee, not the owner. Can you still open the door for me?

Yes, with the owner or a manager in the loop. Tell the locksmith who can confirm you work there and how to reach them. A call to the business owner, the regional manager or the property manager, ideally on a number that can be looked up rather than one you supply, settles it. Staff on an opening shift arrange this on the phone before the locksmith arrives so nothing waits at the door.

Our storefront lock freezes every winter. What do you do about it?

On the day, the cylinder is thawed with lock de-icer or gentle warmth, never hot water or a flame near aluminium, and dried before a moisture-shedding dry lubricant goes in. To stop the pattern, the keyway gets a cover on the most exposed door, salt is kept off the bottom rail, and the closer is adjusted for cold fluid so the door still latches. A cylinder that freezes yearly may be better placed or shielded.

Lakeshore Villageinformation

WaterlooOntario

Business Lockout Service · Waterloo, Westmount, Beechwood, Maple Hills, Rummelhardt

Town
Lakeshore Village, Waterloo
In business
33 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 33 in 100 homes · newer homes
  • About 33% of homes in Waterloo were built in 1980 or earlier, according to the 2021 Census.Builders often key an entire street to a small number of keyways, which is convenient for them and less so for owners afterwards. In newer areas a locksmith can move a household onto a keyway that is genuinely its own.
  • Single-detached houses make up about 49% of homes in Waterloo (2021 Census).In areas of mixed housing, landlords may own a house here and a few units there. A locksmith can put all of it under one master system so the owner carries one key while each tenant's key opens only their own door.

Source: Statistics Canada, Census Profile

Open Lakeshore Village in Google Maps

On-site assessment

Request a visit.

You signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on both doors and no keys came with them.

(226) 806-0434, open 24/7.